ERLUS E 58 RS

Color palette

Red

Technical data

Size:	aprox. 28.5 x 46.5 cm
Gauge:	aprox. 36.0 - 36.6 cm
Average cover width:	aprox. 21.9 cm
Quantity required per m²:	from 12.5 Pieces
Weight per m² in accordance with DIN 1055 incl. battens:	aprox. 0.55 kN/m²
Real weight without battens:	aprox. 53 kg/m²
Pallet capacity:	200 Pieces
Pallet weight:	aprox. 925 kg
Bundle capacity:	5 Pieces
Hail resistance class:	4
Gauge class:	depending on model

More technical data

Average eaves gauge	aprox. 35 cm

Distance between the 1st lath and the angular point of the ridge with ridge connection tiles and standard tiles
X (distance) in mm	Ridge connection tile¹⁾
Roof pitch in °	10°	15°	20°	25°	30°	35°	40°	45°	50°	55°	60°
Ridge tile no. 15	70	65	60	60	55	55	50	45	50	50	45
Ridge ventilation tile no. 15 Lü	70	70	65	60	60	55	55	55	-	-	-
Ridge tile no. 18	65	60	60	55	50	45	45	35	35	35	35
Ridge ventilation tile no. 19 Lü	55	45	45	45	40	40	35	-	-	-	-
Ridge tile no. 21	60	55	50	50	45	40	35	30	30	30	30

X (distance) in mm	Standard tiles²⁾
Roof pitch in °	10°	15°	20°	25°	30°	35°	40°	45°	50°	55°	60°
Ridge tile no. 15	40	35	30	30	20	15	15	15	15	-	-
Ridge ventilation tile no. 15 Lü	-	-	-	-	-	-	-	-	-	-	-
Ridge tile no. 18	-	-	-	-	-	-	-	-	-	-	-
Ridge ventilation tile no. 19 Lü	-	-	-	-	-	-	-	-	-	-	-
Ridge tile no. 21	-	-	-	-	-	-	-	-	-	-	-

1) without aluminium ridge ventilation strap2) with aluminium ridge ventilation strap

Assignment o f additional measures for the Ergoldsbacher E58 RS®

According to the Central Association of German Roofers’ pamphlet on sub-roofs, sub-coverings and under-bracings, and the basic regulations of the Roofers’ Guild , regular roof pitch 16°, minimum roof pitch 10°, according to the state of technology.
Country-specific building standards and/or regulations must be adhered to, if no other contractual agreements have been made.

Increased demands due to:
- long spar lengths (longer than 10 metres)
- concentrated water channel on parts of the roof surface, e.g. under drainpipes, where valleys form junctions and the like
- special roofs like cambered dormer windows or arched and conical roofs
- snowy regions ≥ 1,5 kN/m2 of ground snow load - windy regions in wind load zone 4 or in ridge or hill-top positions or where gullies form

Classification
Class 1: waterproof sub-roof consisting of waterproofing membranes or stitched underlay made of diffusion-open UDB-eA (for extended applications; with integrated counter battens in each case)
Class 2: rainproof sub-roof consisting of waterproofing membranes or stitched underlay made of UDB-eA (for extended applications; with exposed counter battens on nail-sealing tape / compound in each case)
Class 3: glued sub-covering/under-bracing with nail-sealing tape / compound - with ETB/ETA verified nail seals or wooden roof sheathing
Class 4: glued sub-covering/under-bracing
Class 5: sub-covering or under-bracing

Definition of sub-roof's type to use
roof pitch	min. req.	inc. dem.
≥ 16°	Class 5	Class 4
from < 16° to ≥ 12°	Class 4	Class 3
from < 12° to ≥ 10°	Class 3	Class 2

Definition of sub-roof's type to use
roof pitch	min. req.	inc. dem.
≥ 16°	Class 5	Class 4
from < 16° to ≥ 12°	Class 4	Class 3
from < 12° to ≥ 10°	Class 3	Class 2

We recommend concluding separate contracts for designs that are state of the art or state-of-the-art of science and technology.

* The additional measures listed in the table are minimum measures under consideration of Table 1 in the pamphlet on sub-roofs, sub-coverings and under-bracings. Sub-covering panels are to be assigned according to the classification in the pamphlet on sub-roofs, sub-coverings and under-bracings. Increased demands make up categories according to chapter 1.1.3. Further increased demands can arise out of the weighting within a category according to 1.1.3. For example, climate situations can result in several increased demands. Only permitted if the manufacturer provides proof of the functionality and safety of the products used, including accessories (sealing tapes, sticky tapes, sealing compounds, pre-assembled seam securing, etc.), as part of a deluge test and 24-hour rain test on a roof pitch of 15°. Otherwise, the next class up is to be selected. Any limitations noted by the manufacturer are to be taken into account. See the product data information sheet for instructions regarding protection against perforation. These can be used for classes 3 to 6.

Technical drawings

These are the advantages of the
ERLUS E 58 RS

Ideal for flat-pitched roofs ≥ 10° roof pitch, e.g. for extending living space by adding floors
Easy handling ca. 4 kg per piece, can be installed with one hand
Perfect design in E 58 look Harmonious proportion, clean interlocking joint, gentle curvature of the visible surface
Gauge: ca. 36.3 cm
High protection against storm and wind suction thanks to the triple cover in the four-tile overlap
Very good channel flow thanks to high ribs on the head and lateral interlocking joint
Extremely robust Hail resistance class 4
Storm groove for a perfect fit for storm clips
Especially robust and break-proof thanks to high ribs on the front and rear side
Rainproof for roof pitch ≥ 10° thanks to 3-fold head and lateral interlocking
joint

Standard tile

ERLUS Standard Accessories

Verge tile left

Verge tile right

Double roll tile

Ridge connection tile

Ridge connection verge tile left

Ridge connection verge tile right

Ridge connection double roll tile

Pent roof tile

Pent roof verge tile left

Pent roof verge tile right

Ventilation tile

Snow stop tile

Ridge tile no. 15

Ridge end tile no. 15

Ridge compensation tile no. 15

Ridge ventilation tile no. 15 Lü

Ridge beginning tile no. 15 Lü

Ridge end tile no. 15 Lü

Ridge tile no. 18

Ridge end tile no. 18

Ridge compensation tile no. 18

Ridge ventilation tile no. 19 Lü

Ridge beginning tile no. 19 Lü

Ridge end tile no. 19 Lü

Ridge tile no. 21

Ridge end tile no. 21

Ridge compensation tile no. 21

ERLUS Special Accessories

Aluminium sanitary ventilator with base tile

Aluminium aerial with base tile

Aluminium solar outlet with base tile

Aluminium snow stop fence holder with base tile

Aluminium snow stop fence, 20 cm high

Aluminium snow stop incl. snow guard tube bracket with base tile

Aluminium snow guard tube, length 2 m

Aluminium connector for snow guard tube

Aluminium round wood holder with base tile

Aluminium step with base tile

Aluminium step grate 50 cm x 25 cm, with two base tiles

Aluminium step grate 80 cm x 25 cm, with two base tiles

Aluminium extension step grate, 80 x 25 cm, with base tile

Aluminium step grate bracket, uncoated, with base tile

Aluminium safety hooks for ladder, Type A, with base tile

Aluminium solar panel holder with base tile

Ceramic ridge end disc with ERLUS-logo

Ceramic extension plate universal for ridge end tile

Ceramic hip cap no. 15 N

Ceramic hip cap no. 18 N

Ceramic hip cap für ridge beginning tiles no. 19

Ceramic hip cap for ridge end tiles no. 19

Ceramic hip cap no. 21 N

Ceramic hip cap with four outlets for rigde tiles

Ceramic hip start for ridge tiles no. 18

Ceramic hip start for ridge tiles no. 19

Ceramic hip start for ridge tiles no. 21 N

ERLUS universal storm clips I M for battens 24/48 mm

ERLUS universal storm clips II M for battens 30/50 mm

Ridge clips no. 15/17

Ridge clips no. 15/17 Lü

Ridge clips no. 18/21

Ridge clips no. 19 Lü

Aluminium ridge ventilation strap

Eave protection tape

Eave ventilation comb, PVC

Aluminium ridge end disc

Roof surfaces

Completed projects

The solution for flat roofs!

The Ergoldsbacher E 58 RS® is the sixth model in the popular E 58 family and is a special tile for flat roofs. Its sophisticated technical design permits a low roof pitch (standard roof pitch 16°, minimum roof pitch 10°) because the water on the tile surface is channelled away perfectly. The marked profile of the interlocking joints on all sides with triple head and side locks and the direct water channelling ensure that the substructure stays dry. This means that no laborious extra measures are necessary to ensure raintightness.

Quantity required per m²: from 12.5 Pieces

Minimum roof pitch: 10 °

Regular roof pitch: 16 °

Roof tile

Technical data

Technical drawings

Advantages

Product range

References

Roof surfaces

Download audit reports

Download-Centre